Is anyone else out there using Mastercam 2018 to program their EDM?
I did not know that was even a possibility. What brand CNC EDM are you using to be able to program your machine thru Mastercam 2018?
I am using Mastercam 2020 to program my Fanuc wire.
i use Mastercam 2018 to program my 2 wire machines.
1 is a Agie Charmilles Cut E-350 (2018)
2 is Charmilles Robofil 240 (2003)
We use Ficus n our Sodick. This program rocks for wire EDM!
Hello I am using Esprit 2020
We have an Agie cut2000S with the double head option. I mainly run .002” (.050mm) diameter wire and .004” for roughing the pockets.
We have 2 Mitsubishi MVR1200 and four FA10 and FA20’s using Erowa robots for pallet loading and unloading. We also have three Charmilles Robofil2020S. I have used Mastercam for programming the Fadals but find that the Esprit is excellent for WEDM. If you have any questions, feel free to ask. Thanks, Jeff
I have only used Mastercam for programming the wire. Pretty simple to use. Every year they launch the latest and greatest but nothing ever changes on the wire side.
Same here i am using 2021 to program my Fanuc wire.
I use esprit as well for our fanuc’s (as well as all of our other equipment)Very user friendly and customizable and makes for easier cross training
I am using a 2018 Agie/Charmilles Cut E-350 and also a 2003 Charmilles Robofil 240.
i am sorry for the late reply.
I’m using 2019 to program my fanuc
What’s up jonnycrash?
Going good bige in Michigan
Mastercam 2021 to program CHMER machines
Using older MasterCam Xv9. Tweaked the post to output proper code for Fanuc Robocut Alpha 1iC.
Have 2018 and 2020. Compared to Xv9, both are cumbersome for wire use and offer no advantages. SmartCam was way better back in the day.
my wire guy uses 2019 as well